CAM.CONN
Home PHILIPS VCR BETAMAX Hist.-VIDEO TIJD-LIJN PHILIPS VCC U-MATIC

 

 

 

Betamax PALsite
K-Connector

 

These pin descriptions refer to the conections at the video end of the cable. This layout given is the full specification for this connector. Not all machines implement all available options.

 

1 Camera video out
2 Camera video out ground
3 Camera video in
4 Camera video in ground
5 Camera pause. Shorting this pin momentarily to ground will toggle between pause and record or play mode.
6 Tally signal from the video to the camera. This causes the red light in the view finder to be displayed on the camera. It puts 5v on the pin when the video is in Record Mode, Playback, Audio Dub, x2 or Cue/Review mode.
7 Camera audio out CH-2
8 Record review. When the record review switch is pressed on the camera the video plays the last three seconds of the previous recording for monitoring.
9 Camera audio out CH-1
10 Audio ground
11 Camera audio in CH-1
12 Camera audio in CH-2
13 Camera power 12v in. Note, this is internally fused in the VCR.
14 Power ground

Camera cable

CCK-4MP cable
Sony K-type connector to BNC connector,
Phono plug, mini-plug, special mini-plug, 1.5 meters.